Projects: Build, Share and Print Your Children's Book

Put your pictures and story text together as a real book: pick a page size, fill the pages, then share it as a flipbook or export print-ready PDFs.

•

Published on

•

Projects: Build, Share and Print Your Children's Book
Do not index
Projects is where your pictures become a book. You pick a page size, place your pictures and story text page by page, and see the book as it will print. When it is ready, you share it as a flipbook, export it as a print-ready PDF, or turn it into a narrated video.
Best for: Children's book authors ready to put their scenes in order, add the story text and publish.
Credits: Building a project uses no credits.

Before You Start

  • Make your pictures first, for example with Story Scene Pro or Editor Pro. You can also upload pictures from your computer.
  • Decide your book's page size before you create the project. It can't be changed afterwards.
  • Make your pictures in the shape that suits the page size (see Step 1). A picture always fills its page, so a picture in a different shape gets cropped at the edges.
  • Upscale the pictures you plan to print. Projects tells you if a picture is too small for print.

How a Project Is Laid Out

A project is laid out like a printed book:
  1. Front Cover
  1. First Page, a single page on the right, like page 1 of any book
  1. Spreads: pairs of facing pages, left and right
  1. Last Page, a single page on the left
  1. Back Cover
Open any picture book and you see the same thing: one page on its own at the start, then two pages side by side, then one page on its own at the end.
Grid view of a short book about Hazel the hedgehog, with Add Pages, the First Page, a spread and the Last Page marked
Grid view of a short book about Hazel the hedgehog, with Add Pages, the First Page, a spread and the Last Page marked

Step 1: Create a Project and Pick the Page Size

  1. Open Projects in the left sidebar and click New Project.
  1. Type a Project Name (1).
  1. Pick a Page Size (2).
  1. Click Create Project (3).
The Create New Project window with the project name, the four page sizes and the Create Project button marked
The Create New Project window with the project name, the four page sizes and the Create Project button marked
Page size
Trim size
Best with
Square
8.5 × 8.5 in
Square 1:1 pictures
Portrait
8 × 10 in
Portrait 3:4 pictures
Large Portrait
8.5 × 11 in
Portrait 3:4 pictures. Popular for coloring and activity books
Landscape
8.25 × 6 in
Landscape 4:3 pictures
All four are standard Amazon KDP paperback sizes. Sizes with a PRO badge are part of the Creator Plan. The size you picked shows at the top of your project, next to the view buttons.
💡 Pro Tip: The page size cannot be changed later. If you are not sure, check the trim size you plan to choose on KDP first.

Step 2: Add Your Pages

A new project opens in Grid view, which shows the whole book at a glance (see the picture above).
  • Click Add Pages to add a spread: one left page and one right page. The new spread opens in Storybook view, ready to fill.
  • Click any page to open it in Storybook view.
  • Drag a spread to move it to a new place in the book. Both pages move together. The First Page and the Last Page stay where they are.

Step 3: Fill Each Page

Storybook view shows one spread at a time. Each page has its own controls.
Storybook view of one spread with Add Pages and Delete Pages, the Image, Text and Blank switch, Swap Pages, the trash icon and Previous and Next marked
Storybook view of one spread with Add Pages and Delete Pages, the Image, Text and Blank switch, Swap Pages, the trash icon and Previous and Next marked
Under each page, pick what the page is (2):
  • Image: a picture that fills the page. You can also type text on top of it.
  • Text: a page with story text only.
  • Blank: an empty page, for example the back of a title page.
A new spread starts with an Image page on the left and a Text page on the right. To arrange it differently:
  • Swap Pages (3) swaps the left and right pages, for example to move the picture to the right and the text to the left.
  • The trash icon (4) clears one page.
  • Delete Pages (1) removes the whole spread, and Add Pages adds a new one.
  • Previous and Next (5) move through the book.
On an Image page, click Add Image. The Add Image window opens with three ways to choose a picture:
  • Select from Dashboard: click one of your characters to see every picture made from it, then click the picture you want.
  • Recent Uploads: pictures you uploaded before.
  • Upload External Image: a PNG, JPG or WEBP file from your computer, up to 30 MB.
The Add Image window with Select from Dashboard, Recent Uploads and Upload External Image
The Add Image window with Select from Dashboard, Recent Uploads and Upload External Image
To change a picture later, hover over it and click Replace Image in its top left corner.
💡 Pro Tip: Switching a page that already has a picture or text to another type deletes what is on it. Neolemon asks you to confirm first.

Step 4: Add and Style Your Story Text

Click a Text page, or the picture on an Image page, and start typing. The toolbar above the page styles the text you select.
The text toolbar above a picture page with style and size, alignment, Text shadow, and font, colour and line spacing marked
The text toolbar above a picture page with style and size, alignment, Text shadow, and font, colour and line spacing marked
  • Text style and size (1): choose Paragraph, Subheading or Heading, then click plus or minus or type an exact size in points. The text on screen is the size it prints.
  • Alignment (2): left, center or right, and top, middle or bottom of the page.
  • Bold, Italic and Underline.
  • Text shadow (3): see below.
  • Font, text color and line spacing (4): 13 fonts chosen for story text, including Andika, Lexend and Atkinson Hyperlegible, which were designed to be easy to read. Line spacing is Cozy, Comfortable or Airy.
Text on a picture: text typed on an Image page gets a soft shadow so it stays readable over a busy picture. If the text sits on a calm, plain part of the picture, select it and click Text shadow to turn the shadow off for that text.
The same line of text on a picture with Text shadow on and with Text shadow off
The same line of text on a picture with Text shadow on and with Text shadow off
On a narrow window, some of these controls move into a More menu at the end of the toolbar.

Step 5: Add Your Covers

In Grid view, click Add Front Cover and Add Back Cover and choose a picture for each. In Storybook view the covers are the first and last stops: click Previous from the First Page, or Next from the Last Page.
The inside of each cover is marked Not Printed. It stays empty, as in a printed paperback.
💡 Pro Tip: Design your cover in Canvas, where you can place the title and your characters by hand. Export it as a PNG, then add it here as the cover picture. See the AI Canvas guide.

Step 6: Preview, Share and Export

Three buttons at the top right of your project finish the book. They are there in every view.
The Share, Flip Book and Export PDF buttons, with the Export PDF menu open showing Interior Pages PDF and Cover Wrap PDF (for KDP)
The Share, Flip Book and Export PDF buttons, with the Export PDF menu open showing Interior Pages PDF and Cover Wrap PDF (for KDP)

Preview your book as a flipbook

Click Flip Book (2) to read your book with pages that turn, the way a reader will see it.
The flipbook open on a spread: Hazel in the bakery on the left page and the story text on the right page
The flipbook open on a spread: Hazel in the bakery on the left page and the story text on the right page

Share it with a link

Click Share (1) to get a link to the flipbook. Anyone with the link can read the book in their browser, on a computer or a phone, with no account needed.

Export for print

Click Export PDF (3) and pick a file:
  • Interior Pages PDF: every page inside the book, at your page size with bleed, at 300 DPI.
  • Cover Wrap PDF (for KDP): the back cover, spine and front cover in one file, sized for your page count. Add a front and a back cover first.
Before it exports, Neolemon checks the things that get a book rejected or printed badly, and lists what it finds:
The Export Interior Pages PDF window showing the page count, the 24-page minimum warning and two pictures that are below print resolution
The Export Interior Pages PDF window showing the page count, the 24-page minimum warning and two pictures that are below print resolution
What it tells you
What to do
KDP requires a minimum of 24 pages
Add pages until the book has at least 24
A picture is below print resolution
Upscale that picture, then replace it on the page
The text on a page is too long for the page
Shorten it or split it across two pages
Keep the lower-right area of your back cover free of text
Amazon prints the barcode there, so leave that corner empty
You can still export with warnings showing, for example to print a short book at home. Upload the two files to Amazon KDP, IngramSpark or any print service.

Turn Your Book Into a Video

Click Story Studio at the top of your project to turn the book into a narrated video. Every page with a picture or text becomes a scene, in book order, and you record the story in your own voice. See the Story Studio guide.

FAQ

Can I change the page size after I create a project? No. The size is set when you create the project. To use another size, create a new project and add your pictures to it.
My project was made before page sizes existed. What size is it? Square, 8.5 × 8.5 in. Your pages and text were moved to the new layout as they were.
Why is part of my picture cut off? A picture always fills its page. If its shape is different from the page, the edges are cropped. Use Reframe to change the picture's shape to match your page size, then replace it on the page.
How many pages does my book need? Amazon KDP needs at least 24 pages for a paperback. Your page count is the First Page, two pages for each spread, and the Last Page.
Does a blank page count as a page? Yes. A Blank page prints as an empty page and counts toward your page count.
Can I use pictures I made outside Neolemon? Yes. In the Add Image window, use Upload External Image.

What to Read Next


Need help? Email us at support@neolemon.com

Ready to Bring Your Cartoon Stories to Life?

Join 100K+ storytellers from 190+ countries

Start for Free
Sachin Kamath

Written by

Sachin Kamath

Co-founder & CEO at Neolemon | Creative Technologist